MODEL NUMBER
014-0200-(Color#): Rosewood
BODY
Body Material: Alder
Body Shape: Stratocaster
NECK
Neck Material: Maple
Neck Finish: Gloss Urethane
Neck Shape: “C”
Scale Length: 25.5” (648 mm)
Fingerboard Material: Rosewood
Fingerboard Radius: 9.5” (241mm)
Number of Frets: 21
Fret Size: Vintage
Nut Material: Synthetic Bone
Nut Width: 1.650” (42 mm)
Position Inlays: White Dot, Narrow Spacing
Truss Rod: Standard, Head Adjust, Black Plastic Insert
Skunk Stripe: Yes
HEADSTOCK
Type: Small
Logo: Spaghetti
Other Markings, front: “STRATOCASTER”
Other Markings, back: “MADE IN U.S.A.”, Serial Number “FN2”
Note: Early Models had Modern Logo, “MADE IN U.S.A.”, and “N” Serial Number on the front face of the headstock
ELECTRONICS
Bridge Pickup: Standard Single Coil, Symmetrically Staggered Poles, #2 Ceramic Bars
Middle Pickup: Standard Single Coil, Symmetrically Staggered Poles, #2 Ceramic Bars
Neck Pickup: Standard Single Coil, Symmetrically Staggered Poles, #2 Ceramic Bars
Controls: Master Volume, Tone 1. (Neck), Tone 2. (Mid)
Switching: 5-Position Blade
Configuration: SSS
HARDWARE
Bridge: Vintage Style Synchronized Tremolo
Saddles: Vintage-Style, “FENDER”/“FENDER” Same Directions
Tuning Machines: Standard, “Fender” Stamped Covered
String Tree: Wing
Hardware: Chrome
Pickguard: 3-Ply White, 11-Hole (Config. Modern)
Back Plate: 1-Ply White, Single Slot, Offset Middle Screws
Control Knobs: White
Switch Tip: White
Tremolo Arm Tip: White
Pickup covers: White
Neck Plate: 4-Bolt, Plain (Maybe a few had the “F” stamp)
COLORS
(706) Black
(758) Torino Red
(780) Arctic White
MISCELLANEOUS
Strings: .009-.042
ACCESSORIES
None
COMMENTS
US made guitar made to Mexico Standard Strat specifications and for the export market. Early versions of these models have a serial number that begins with N, later versions begin with FN. Some remained and were sold in the US.
Priced around $500.00
014-0200-(Color#): Rosewood
BODY
Body Material: Alder
Body Shape: Stratocaster
NECK
Neck Material: Maple
Neck Finish: Gloss Urethane
Neck Shape: “C”
Scale Length: 25.5” (648 mm)
Fingerboard Material: Rosewood
Fingerboard Radius: 9.5” (241mm)
Number of Frets: 21
Fret Size: Vintage
Nut Material: Synthetic Bone
Nut Width: 1.650” (42 mm)
Position Inlays: White Dot, Narrow Spacing
Truss Rod: Standard, Head Adjust, Black Plastic Insert
Skunk Stripe: Yes
HEADSTOCK
Type: Small
Logo: Spaghetti
Other Markings, front: “STRATOCASTER”
Other Markings, back: “MADE IN U.S.A.”, Serial Number “FN2”
Note: Early Models had Modern Logo, “MADE IN U.S.A.”, and “N” Serial Number on the front face of the headstock
ELECTRONICS
Bridge Pickup: Standard Single Coil, Symmetrically Staggered Poles, #2 Ceramic Bars
Middle Pickup: Standard Single Coil, Symmetrically Staggered Poles, #2 Ceramic Bars
Neck Pickup: Standard Single Coil, Symmetrically Staggered Poles, #2 Ceramic Bars
Controls: Master Volume, Tone 1. (Neck), Tone 2. (Mid)
Switching: 5-Position Blade
Configuration: SSS
HARDWARE
Bridge: Vintage Style Synchronized Tremolo
Saddles: Vintage-Style, “FENDER”/“FENDER” Same Directions
Tuning Machines: Standard, “Fender” Stamped Covered
String Tree: Wing
Hardware: Chrome
Pickguard: 3-Ply White, 11-Hole (Config. Modern)
Back Plate: 1-Ply White, Single Slot, Offset Middle Screws
Control Knobs: White
Switch Tip: White
Tremolo Arm Tip: White
Pickup covers: White
Neck Plate: 4-Bolt, Plain (Maybe a few had the “F” stamp)
COLORS
(706) Black
(758) Torino Red
(780) Arctic White
MISCELLANEOUS
Strings: .009-.042
ACCESSORIES
None
COMMENTS
US made guitar made to Mexico Standard Strat specifications and for the export market. Early versions of these models have a serial number that begins with N, later versions begin with FN. Some remained and were sold in the US.
Priced around $500.00
Courtesy Chicago Music Exchange
