MODEL NUMBER
5505700899: Godzilla Blue
5506200899: Godzilla Black
BODY
Body Material: Alder Myrtlewood Top
Body Finish: Gloss Polyester
Body Shape: Stratocaster
NECK
Neck Material: Maple
Neck Finish: Satin Urethane Finish on Back, Gloss Urethane Finish on Front
Neck Shape: Modern “C”
Scale Length: 25.5” (648 mm)
Fingerboard Material: Rosewood
Fingerboard Radius: 9.5” (241 mm)
Number of Frets: 22
Fret Size: Medium Jumbo
Nut Material: Bone, Black Painted
Nut Width: 1.650” (41.9 mm)
Position Inlays: None; Black Godzilla Logo (Black Model), Red Godzilla Logo (Blue Model)
Side Dots: White Dot
Truss Rod: Standard, Head Adjust
Skunk Stripe: √
Micro-Tilt: None
HEADSTOCK
Type: Small, Black Painted
Logo: Silver Foil Spaghetti
Other Markings, front: Silver Foil “STRATOCASTER”
Patent Numbers: None
Other Markings, back: “MADE IN JAOPAN”, Serial Number
Truss Rod Dowel: None
Walnut Plug: None
ELECTRONICS
Bridge Pickup: Custom Godzilla Humbucking
Neck Pickup: Custom Godzilla Humbucking
Controls: Master Volume, Tone 1. (Neck), Tone 2. (Gain for Distortion Circuit)
Switching: 3-Position Blade (On the Lower Horn)
Auxiliary Switching: None
Special Electronics: Built-in distortion circuit activated by pressing the Tone 2 knob
Configuration: HH
HARDWARE
Bridge: 2-Point Synchronized Tremolo
Saddles: Vintage Style Bent Steel, “FENDER”/”FENDER” Same Directions
Tuning Machines: Vintage Style
String Tree: Wing
Hardware: Black
Pickguard: 1-Ply Grey with Godzilla Artwork, 11-Hole (Config. Vimntage)
Back Plate: 1-Ply Black, Single Slot, Offset Middle Screws
Control Knobs: Black
Switch Tip: Black
Tremolo Arm Tip: Black
Pickup covers: Black
Neck Plate: 4-Bolt, “70 GODZILLA”, “TM & TOHO CO., LTD.
COLORS AND MODELS
Godzilla Black
Godzilla Blue
MISCELLANEOUS
Strings: .009-.042
“G.L.O – Gain-Linked Optics” system
ACCESSORIES
Custom “70 GODZILLA” Black Hardshell Case
COMMENTS
Although it was unveiled in 10/2025, the first units had been manufactured a few months earlier.
Pressing the Tone 2 knob activates the built-in distortion circuit.
Equipped with the “G.L.O – Gain-Linked Optics” system, where light intensity changes according to the amount of distortion.
On sale starting Friday, October 24, 2024
Fender Flagship Tokyo store exclusive model
Not to be confused with the Masterbuilt version
FENDER SAID
Made in Japan Godzilla Stratocaster is a special model born from the collaboration between the globally popular tokusatsu monster movie series "Godzilla," which celebrated its 70th anniversary in 2024 since the 1954 film release, and Fender's Stratocaster, which also celebrated its 70th anniversary in 2024. The design is inspired throughout by the power and appeal of Godzilla, who reigns as the "King of Monsters."
The alder body is laminated with myrtle wood, stained in deep blue and finished with a gloss coating to express Godzilla's distinctive imposing presence. The neck features a "Modern C" shape with 22-fret medium jumbo frets, and the Godzilla logo is boldly featured around the 12th fret of the fingerboard, creating a strong visual impact.
The sound quality has been thoroughly crafted with attention to detail. An internal distortion circuit is activated by pushing the Tone 2 knob. Additionally, it features the "G.L.O - Gain-Linked Optics" mechanism (patent pending), where the light intensity changes according to the amount of distortion. This causes Godzilla's dorsal fins designed on the pickguard to illuminate, with the light intensity increasing as distortion increases. This represents the moment just before an enraged Godzilla unleashes its atomic breath, creating effects for both visual and auditory senses through sound and light.
Furthermore, it's equipped with "Custom Godzilla Humbucking" pickups developed specifically for this model, achieving an overwhelmingly heavy sound. From the black unified hardware to every detail, this is a thoroughly crafted, one-of-a-kind instrument.
The guitar comes with a special specification neck plate symbolizing this collaboration, a certificate of authenticity, and a dedicated hard case. Symbolizing this collaboration, the guitar includes a special neck plate engraved with a serial number starting from No. 01, along with a certificate of authenticity and a dedicated hard case.
5505700899: Godzilla Blue
5506200899: Godzilla Black
BODY
Body Material: Alder Myrtlewood Top
Body Finish: Gloss Polyester
Body Shape: Stratocaster
NECK
Neck Material: Maple
Neck Finish: Satin Urethane Finish on Back, Gloss Urethane Finish on Front
Neck Shape: Modern “C”
Scale Length: 25.5” (648 mm)
Fingerboard Material: Rosewood
Fingerboard Radius: 9.5” (241 mm)
Number of Frets: 22
Fret Size: Medium Jumbo
Nut Material: Bone, Black Painted
Nut Width: 1.650” (41.9 mm)
Position Inlays: None; Black Godzilla Logo (Black Model), Red Godzilla Logo (Blue Model)
Side Dots: White Dot
Truss Rod: Standard, Head Adjust
Skunk Stripe: √
Micro-Tilt: None
HEADSTOCK
Type: Small, Black Painted
Logo: Silver Foil Spaghetti
Other Markings, front: Silver Foil “STRATOCASTER”
Patent Numbers: None
Other Markings, back: “MADE IN JAOPAN”, Serial Number
Truss Rod Dowel: None
Walnut Plug: None
ELECTRONICS
Bridge Pickup: Custom Godzilla Humbucking
Neck Pickup: Custom Godzilla Humbucking
Controls: Master Volume, Tone 1. (Neck), Tone 2. (Gain for Distortion Circuit)
Switching: 3-Position Blade (On the Lower Horn)
Auxiliary Switching: None
Special Electronics: Built-in distortion circuit activated by pressing the Tone 2 knob
Configuration: HH
HARDWARE
Bridge: 2-Point Synchronized Tremolo
Saddles: Vintage Style Bent Steel, “FENDER”/”FENDER” Same Directions
Tuning Machines: Vintage Style
String Tree: Wing
Hardware: Black
Pickguard: 1-Ply Grey with Godzilla Artwork, 11-Hole (Config. Vimntage)
Back Plate: 1-Ply Black, Single Slot, Offset Middle Screws
Control Knobs: Black
Switch Tip: Black
Tremolo Arm Tip: Black
Pickup covers: Black
Neck Plate: 4-Bolt, “70 GODZILLA”, “TM & TOHO CO., LTD.
COLORS AND MODELS
Godzilla Black
Godzilla Blue
MISCELLANEOUS
Strings: .009-.042
“G.L.O – Gain-Linked Optics” system
ACCESSORIES
Custom “70 GODZILLA” Black Hardshell Case
COMMENTS
Although it was unveiled in 10/2025, the first units had been manufactured a few months earlier.
Pressing the Tone 2 knob activates the built-in distortion circuit.
Equipped with the “G.L.O – Gain-Linked Optics” system, where light intensity changes according to the amount of distortion.
On sale starting Friday, October 24, 2024
Fender Flagship Tokyo store exclusive model
Not to be confused with the Masterbuilt version
FENDER SAID
Made in Japan Godzilla Stratocaster is a special model born from the collaboration between the globally popular tokusatsu monster movie series "Godzilla," which celebrated its 70th anniversary in 2024 since the 1954 film release, and Fender's Stratocaster, which also celebrated its 70th anniversary in 2024. The design is inspired throughout by the power and appeal of Godzilla, who reigns as the "King of Monsters."
The alder body is laminated with myrtle wood, stained in deep blue and finished with a gloss coating to express Godzilla's distinctive imposing presence. The neck features a "Modern C" shape with 22-fret medium jumbo frets, and the Godzilla logo is boldly featured around the 12th fret of the fingerboard, creating a strong visual impact.
The sound quality has been thoroughly crafted with attention to detail. An internal distortion circuit is activated by pushing the Tone 2 knob. Additionally, it features the "G.L.O - Gain-Linked Optics" mechanism (patent pending), where the light intensity changes according to the amount of distortion. This causes Godzilla's dorsal fins designed on the pickguard to illuminate, with the light intensity increasing as distortion increases. This represents the moment just before an enraged Godzilla unleashes its atomic breath, creating effects for both visual and auditory senses through sound and light.
Furthermore, it's equipped with "Custom Godzilla Humbucking" pickups developed specifically for this model, achieving an overwhelmingly heavy sound. From the black unified hardware to every detail, this is a thoroughly crafted, one-of-a-kind instrument.
The guitar comes with a special specification neck plate symbolizing this collaboration, a certificate of authenticity, and a dedicated hard case. Symbolizing this collaboration, the guitar includes a special neck plate engraved with a serial number starting from No. 01, along with a certificate of authenticity and a dedicated hard case.
ENG: The origin of Fender Japan and The Japanese "domestic" Stratocasters after 2015
ITA: La nascita del Made in Japan Fender e Le Stratocaster giapponesi "domestic" dopo il 2015
ITA: La nascita del Made in Japan Fender e Le Stratocaster giapponesi "domestic" dopo il 2015
