MODEL NUMBER
0113910772
BODY
Body Material: Alder
Body Finish: Gloss Urethane
Body Shape: Stratocaster
NECK
Neck Material: Rosewood
Neck Finish: Satin
Neck Shape: Deep "C"
Scale Length: 25.5" (648 mm)
Fingerboard Material: Rosewood, Rolled Edges
Fingerboard Radius: 9.5” (241 mm)
Number of Frets: 22
Fret Size: Narrow Tall
Nut Material: Bone
Nut Width: 1.685” (42.8 mm)
Position Inlays: White Dot; Narrow Spacing
Truss Rod: BiFlex
Skunk Stripe: Yes
Micro Tilt
HEADSTOCK
Type: Small
Logo: Spaghetti
Other, front: “STRATOCASTER”
Other, back: None
ELECTRONICS
Bridge Pickup: V-Mod II Double Tap Humbucking
Middle Pickup: V-Mod II Single-Coil Strat Pickup, Beveled Staggered Poles
Neck Pickup: V-Mod II Single-Coil Strat Pickup, Beveled Staggered Poles
Controls: Master Volume, Tone 1. (Neck, Mid), Tone 2. (Bridge)
Switching: 5-Position Blade
Special Electronics: Treble Bleed Circuit and Push-Pull Switch on Tone 2.
Configuration: HSS
HARDWARE
Bridge: 2-Point Synchronized Tremolo with Pop-In Tremolo Arm and Cold-Rolled Steel Block
Saddles: Vintage Style, "FENDER"/"FENDER", reverse directions
Tuning Machines: Fender Standard Cast/Sealed Staggered
String Tree: New Modern "T"
Hardware: Nickel/Chrome
Pickguard: 4-Ply Tortoise Shell 11-Hole (Config. Modern)
Control Knobs: Aged White
Switch Tip: Aged White
Tremolo Arm Tip: Aged White
Pickup covers: Aged White with Zebra Humbucker
Neck Plate: Asymmetric 4-Bolt, "Fender AMERICAN PROFESSIONAL II", Serial Number “DE”
COLORS
(772) Sonic Blue
MISCELLANEOUS:
Strings: .009-.042
ACCESSORIES
Deluxe Molded Case
COMMENTS
Treble bleed circuit maintains highs when reducing volume
The push-push switch on the second tone control activates the unique Double Tap humbucking pickup, unlocking single-coil tones without any volume loss
The Deep “C” neck profile is slim at the nut and fills out gradually as it approaches the neck joint
0113910772
BODY
Body Material: Alder
Body Finish: Gloss Urethane
Body Shape: Stratocaster
NECK
Neck Material: Rosewood
Neck Finish: Satin
Neck Shape: Deep "C"
Scale Length: 25.5" (648 mm)
Fingerboard Material: Rosewood, Rolled Edges
Fingerboard Radius: 9.5” (241 mm)
Number of Frets: 22
Fret Size: Narrow Tall
Nut Material: Bone
Nut Width: 1.685” (42.8 mm)
Position Inlays: White Dot; Narrow Spacing
Truss Rod: BiFlex
Skunk Stripe: Yes
Micro Tilt
HEADSTOCK
Type: Small
Logo: Spaghetti
Other, front: “STRATOCASTER”
Other, back: None
ELECTRONICS
Bridge Pickup: V-Mod II Double Tap Humbucking
Middle Pickup: V-Mod II Single-Coil Strat Pickup, Beveled Staggered Poles
Neck Pickup: V-Mod II Single-Coil Strat Pickup, Beveled Staggered Poles
Controls: Master Volume, Tone 1. (Neck, Mid), Tone 2. (Bridge)
Switching: 5-Position Blade
Special Electronics: Treble Bleed Circuit and Push-Pull Switch on Tone 2.
Configuration: HSS
HARDWARE
Bridge: 2-Point Synchronized Tremolo with Pop-In Tremolo Arm and Cold-Rolled Steel Block
Saddles: Vintage Style, "FENDER"/"FENDER", reverse directions
Tuning Machines: Fender Standard Cast/Sealed Staggered
String Tree: New Modern "T"
Hardware: Nickel/Chrome
Pickguard: 4-Ply Tortoise Shell 11-Hole (Config. Modern)
Control Knobs: Aged White
Switch Tip: Aged White
Tremolo Arm Tip: Aged White
Pickup covers: Aged White with Zebra Humbucker
Neck Plate: Asymmetric 4-Bolt, "Fender AMERICAN PROFESSIONAL II", Serial Number “DE”
COLORS
(772) Sonic Blue
MISCELLANEOUS:
Strings: .009-.042
ACCESSORIES
Deluxe Molded Case
COMMENTS
Treble bleed circuit maintains highs when reducing volume
The push-push switch on the second tone control activates the unique Double Tap humbucking pickup, unlocking single-coil tones without any volume loss
The Deep “C” neck profile is slim at the nut and fills out gradually as it approaches the neck joint
ENG: About the American Professional II Series
ITA: Un po' di storia: la nascita della serie American Professional II
ITA: Un po' di storia: la nascita della serie American Professional II
Courtesy of Centro Chitarre
