MODEL NUMBER
0187000007
BODY
Body Material: Premium Alder
Body Finish: Gloss Urethane
Body Shape: Stratocaster
NECK
Neck Material: Maple
Neck Finish: Satin Urethane
Neck Shape: Modern “C”
Scale Length: 25.5" (648 mm)
Fingerboard Material: Maple; Rolled Fretboard Edges
Fingerboard Radius: 9.5” - 14” Compound Radius (241 mm - 355.6 mm)
Number of Frets: 22
Fret Size: Medium Jumbo
Nut Material: Synthetic Bone
Nut Width: 1.685” (42.8 mm)
Position Inlays: White Pearloid Dot; Narrow Spacing
Truss Rod: BiFlex
Truss Rod Nut: 1/8" American Series
Skunk Stripe: Yes
Micro Tilt
HEADSTOCK
Type: Small
Logo: Appliqué
Other Decals, front: Silverish "STRATOCASTER"
Other Decals, back: "MADE IN USA", Serial Number
ELECTRONICS
Bridge Pickup: Noiseless N3 Strat Pickups, Staggered Beveled Poles, "Fender"/"N3"
Middle Pickup: Noiseless N3 Strat Pickups, Staggered Beveled Poles, "Fender"/"N3"
Neck Pickup: Noiseless N3 Strat Pickups, Staggered Beveled Poles, "Fender"/"N3"
Controls: Master Volume (with S-1 Switch), Tone 1. (Neck), No-Load Tone Control (Mid, Bridge)
Switching: 5-Position Blade
Configuration: SSS
POSITIONS
S-1 Switch Up (Off):
Position 1. Bridge Pickup
Position 2. Bridge and Middle Pickup in Parallel
Position 3. Middle Pickup
Position 4. Middle and Neck Pickup in Parallel
Position 5. Neck Pickup
S-1 Switch Down (On):
Position 1. Bridge, Middle and Neck Pickups in Series
Position 2. Bridge and Middle Pickup in Series
Position 3. Middle and Neck Pickup in Series
Position 4. Bridge and Neck Pickup Out-Of-Phase, and in Series with Special Tone Capacitor
Position 5. Bridge and Middle Pickup in Series and Out-Of-Phase, and in Parallel with Neck Pickup
HARDWARE
Bridge: Deluxe 2-point synchronized Tremolo with Pop in Arm and Copper Infused High Mass 100% Metal Bridge Block
Saddles: Stainless Steel Block Saddles
Tuning Machines: Deluxe Staggered Cast/Sealed Locking
String Tree: Ezy Glider
Hardware: Nickel/Chrome
Pickguard: 4-Ply Tortoise Shell, 11 Hole (Config. Modern)
Control Knobs: Aged White
Switch Tip: Aged White
Tremolo Arm Tip: None
Pickup covers: Aged White
Neck Plate: Asymmetrical 4-Bolt, "Fender CORONA, CALIFORNIA"
COLORS
2-Tone Iron Burst
MISCELLANEOUS:
Strings: .009-.042
Truss Rod/Tilt Adjustment Wrench: 1/8” Hex
Saddle Height Adjustment Wrench: .050” Hex
Tremolo Arm Sleeve Tension Adjustment Wrench: 3/32”
ACCESSORIES
SKB Hardshell Case (Black on Black)
COMMENTS
The guitar was part of an extremely limited edition of instruments produced exclusively for Fender's top 200 United States dealers who decided to order some of them at Fender's Dealer Event in 2013.
Few units have the word “PROTOTYPE” stamped in the wood on the back of the headstock.
0187000007
BODY
Body Material: Premium Alder
Body Finish: Gloss Urethane
Body Shape: Stratocaster
NECK
Neck Material: Maple
Neck Finish: Satin Urethane
Neck Shape: Modern “C”
Scale Length: 25.5" (648 mm)
Fingerboard Material: Maple; Rolled Fretboard Edges
Fingerboard Radius: 9.5” - 14” Compound Radius (241 mm - 355.6 mm)
Number of Frets: 22
Fret Size: Medium Jumbo
Nut Material: Synthetic Bone
Nut Width: 1.685” (42.8 mm)
Position Inlays: White Pearloid Dot; Narrow Spacing
Truss Rod: BiFlex
Truss Rod Nut: 1/8" American Series
Skunk Stripe: Yes
Micro Tilt
HEADSTOCK
Type: Small
Logo: Appliqué
Other Decals, front: Silverish "STRATOCASTER"
Other Decals, back: "MADE IN USA", Serial Number
ELECTRONICS
Bridge Pickup: Noiseless N3 Strat Pickups, Staggered Beveled Poles, "Fender"/"N3"
Middle Pickup: Noiseless N3 Strat Pickups, Staggered Beveled Poles, "Fender"/"N3"
Neck Pickup: Noiseless N3 Strat Pickups, Staggered Beveled Poles, "Fender"/"N3"
Controls: Master Volume (with S-1 Switch), Tone 1. (Neck), No-Load Tone Control (Mid, Bridge)
Switching: 5-Position Blade
Configuration: SSS
POSITIONS
S-1 Switch Up (Off):
Position 1. Bridge Pickup
Position 2. Bridge and Middle Pickup in Parallel
Position 3. Middle Pickup
Position 4. Middle and Neck Pickup in Parallel
Position 5. Neck Pickup
S-1 Switch Down (On):
Position 1. Bridge, Middle and Neck Pickups in Series
Position 2. Bridge and Middle Pickup in Series
Position 3. Middle and Neck Pickup in Series
Position 4. Bridge and Neck Pickup Out-Of-Phase, and in Series with Special Tone Capacitor
Position 5. Bridge and Middle Pickup in Series and Out-Of-Phase, and in Parallel with Neck Pickup
HARDWARE
Bridge: Deluxe 2-point synchronized Tremolo with Pop in Arm and Copper Infused High Mass 100% Metal Bridge Block
Saddles: Stainless Steel Block Saddles
Tuning Machines: Deluxe Staggered Cast/Sealed Locking
String Tree: Ezy Glider
Hardware: Nickel/Chrome
Pickguard: 4-Ply Tortoise Shell, 11 Hole (Config. Modern)
Control Knobs: Aged White
Switch Tip: Aged White
Tremolo Arm Tip: None
Pickup covers: Aged White
Neck Plate: Asymmetrical 4-Bolt, "Fender CORONA, CALIFORNIA"
COLORS
2-Tone Iron Burst
MISCELLANEOUS:
Strings: .009-.042
Truss Rod/Tilt Adjustment Wrench: 1/8” Hex
Saddle Height Adjustment Wrench: .050” Hex
Tremolo Arm Sleeve Tension Adjustment Wrench: 3/32”
ACCESSORIES
SKB Hardshell Case (Black on Black)
COMMENTS
The guitar was part of an extremely limited edition of instruments produced exclusively for Fender's top 200 United States dealers who decided to order some of them at Fender's Dealer Event in 2013.
Few units have the word “PROTOTYPE” stamped in the wood on the back of the headstock.
Courtesy of Willcutt Guitars
Courtesy of Rakuten