BODY
Body Material: Alder
Body Finish: Gloss Urethane
Body Shape: Stratocaster
NECK
Neck Material: Maple
Neck Finish: Satin Urethane
Neck Shape: Modern “C”
Scale Length: 25.5" (648 mm)
Fingerboard Material: Maple; Rolled Fretboard Edges
Fingerboard Radius: 9.5” - 14” Compound Radius (241 mm - 355.6 mm)
Number of Frets: 22
Fret Size: Medium Jumbo
Nut Material: Synthetic Bone
Nut Width: 1.685” (42.8 mm)
Position Inlays: Black Dots, Narrow Spacing
Truss Rod: BiFlex
Skunk Stripe: Yes
Micro Tilt
HEADSTOCK
Type: Large
Logo: Appliqué
Other Decals, front: Silverish "STRATOCASTER"
Other Decals, back: "MADE IN USA", Serial Number
ELECTRONICS
Bridge Pickup: Unknown, Probably Texas Special
Middle Pickup: Unknown, Probably Texas Special
Neck Pickup: Unknown, Probably Texas Special
Controls: Master Volume, Tone 1., Tone 2.
Switching: 5-Position Blade
Configuration: SSS
HARDWARE
Bridge: Deluxe 2-point synchronized Tremolo with Pop in Arm and Copper Infused High Mass 100% Metal Bridge Block
Saddles: Vintage Style, "FENDER"/"FENDER" reverse directions
Tuning Machines: Deluxe Staggered Cast/Sealed locking tuning machines
String Tree: #2 Ezy Glider
Hardware: Nickel/Chrome
Pickguard: 3-Ply Black, 11 Hole (Config. Modern)
Control Knobs: Aged White
Switch Tip: Aged White
Tremolo Arm Tip: Aged White
Pickup covers: Aged White
Neck Plate: Asymmetric 4-Bolt, "Fender CORONA, CALIFORNIA"
COLORS
Silver Satin
MISCELLANEOUS:
Strings: .009-.042
ACCESSORIES
SBK Hardshell Case
COMMENTS
The guitar was part of an extremely limited edition of instruments produced exclusively for Fender's top 200 United States dealers who decided to order some of them at Fender's Dealer Event in 2013.
It's so strange that according to the sticker on the pickguard pickups should be Noiseless and the guitar should be equipped with the S-1 switch, while actually pickups were not Noiseless, and the guitar was devoid of S-1 Switch.
Few units have the word “PROTOTYPE” stamped in the wood on the back of the headstock.
Body Material: Alder
Body Finish: Gloss Urethane
Body Shape: Stratocaster
NECK
Neck Material: Maple
Neck Finish: Satin Urethane
Neck Shape: Modern “C”
Scale Length: 25.5" (648 mm)
Fingerboard Material: Maple; Rolled Fretboard Edges
Fingerboard Radius: 9.5” - 14” Compound Radius (241 mm - 355.6 mm)
Number of Frets: 22
Fret Size: Medium Jumbo
Nut Material: Synthetic Bone
Nut Width: 1.685” (42.8 mm)
Position Inlays: Black Dots, Narrow Spacing
Truss Rod: BiFlex
Skunk Stripe: Yes
Micro Tilt
HEADSTOCK
Type: Large
Logo: Appliqué
Other Decals, front: Silverish "STRATOCASTER"
Other Decals, back: "MADE IN USA", Serial Number
ELECTRONICS
Bridge Pickup: Unknown, Probably Texas Special
Middle Pickup: Unknown, Probably Texas Special
Neck Pickup: Unknown, Probably Texas Special
Controls: Master Volume, Tone 1., Tone 2.
Switching: 5-Position Blade
Configuration: SSS
HARDWARE
Bridge: Deluxe 2-point synchronized Tremolo with Pop in Arm and Copper Infused High Mass 100% Metal Bridge Block
Saddles: Vintage Style, "FENDER"/"FENDER" reverse directions
Tuning Machines: Deluxe Staggered Cast/Sealed locking tuning machines
String Tree: #2 Ezy Glider
Hardware: Nickel/Chrome
Pickguard: 3-Ply Black, 11 Hole (Config. Modern)
Control Knobs: Aged White
Switch Tip: Aged White
Tremolo Arm Tip: Aged White
Pickup covers: Aged White
Neck Plate: Asymmetric 4-Bolt, "Fender CORONA, CALIFORNIA"
COLORS
Silver Satin
MISCELLANEOUS:
Strings: .009-.042
ACCESSORIES
SBK Hardshell Case
COMMENTS
The guitar was part of an extremely limited edition of instruments produced exclusively for Fender's top 200 United States dealers who decided to order some of them at Fender's Dealer Event in 2013.
It's so strange that according to the sticker on the pickguard pickups should be Noiseless and the guitar should be equipped with the S-1 switch, while actually pickups were not Noiseless, and the guitar was devoid of S-1 Switch.
Few units have the word “PROTOTYPE” stamped in the wood on the back of the headstock.
Courtesy of Reverb