BODY
Body Material: Alder
Body Finish: Gloss Urethane
Body Shape: Stratocaster
NECK
Neck Material: Maple
Neck Finish: Satin Urethane
Neck Shape: Modern “C”
Scale Length: 25.5" (648 mm)
Fingerboard Material: Maple; Rolled Fretboard Edges
Fingerboard Radius: 9.5” - 14” Compound Radius (241 mm - 355.6 mm)
Number of Frets: 22
Fret Size: Medium Jumbo
Nut Material: Synthetic Bone
Nut Width: 1.685” (42.8 mm)
Position Inlays: Black Dots, Narrow Spacing
Truss Rod: BiFlex
Skunk Stripe: Yes
Micro Tilt
HEADSTOCK
Type: Small, Matching Color
Logo: Blue Spaghetti
Other Decals, front: None
Other Decals, back: "MADE IN USA", Serial Number
ELECTRONICS
Bridge Pickup: Unknown, Probably Texas Special
Middle Pickup: Unknown, Probably Texas Special
Neck Pickup: Unknown, Probably Texas Special
Controls: Master Volume, Tone 1., Tone 2.
Switching: 5-Position Blade
Configuration: SSS
HARDWARE
Bridge: Deluxe 2-point synchronized Tremolo, Copper Infused High Mass 100% Metal Bridge Block (with Pop in Arm?)
Saddles: Block Saddles
Tuning Machines: Deluxe Staggered Cast/Sealed locking tuning machines
String Tree: Ezy Glider
Hardware: Nickel/Chrome
Pickguard: 1-Ply White, 8 Hole
Control Knobs: Chrome Hat
Switch Tip: Chrome
Tremolo Arm Tip: Unknown
Pickup covers: Navy Blue
Neck Plate: Asymmetric 4-Bolt, "Fender CORONA, CALIFORNIA"
COLORS
Snow White
MISCELLANEOUS:
Strings: .009-.042
ACCESSORIES
Hardshell Case
COMMENTS
The guitar was part of an extremely limited edition of instruments produced exclusively for Fender's top 200 United States dealers who decided to order some of them at Fender's Dealer Event in 2013.
It's so strange that according to the sticker on the pickguard pickups should be Noiseless and the guitar should be equipped with the S-1 switch, while actually pickups were not Noiseless, and the guitar was devoid of S-1 Switch.
Few units have the word “PROTOTYPE” stamped in the wood on the back of the headstock.
Body Material: Alder
Body Finish: Gloss Urethane
Body Shape: Stratocaster
NECK
Neck Material: Maple
Neck Finish: Satin Urethane
Neck Shape: Modern “C”
Scale Length: 25.5" (648 mm)
Fingerboard Material: Maple; Rolled Fretboard Edges
Fingerboard Radius: 9.5” - 14” Compound Radius (241 mm - 355.6 mm)
Number of Frets: 22
Fret Size: Medium Jumbo
Nut Material: Synthetic Bone
Nut Width: 1.685” (42.8 mm)
Position Inlays: Black Dots, Narrow Spacing
Truss Rod: BiFlex
Skunk Stripe: Yes
Micro Tilt
HEADSTOCK
Type: Small, Matching Color
Logo: Blue Spaghetti
Other Decals, front: None
Other Decals, back: "MADE IN USA", Serial Number
ELECTRONICS
Bridge Pickup: Unknown, Probably Texas Special
Middle Pickup: Unknown, Probably Texas Special
Neck Pickup: Unknown, Probably Texas Special
Controls: Master Volume, Tone 1., Tone 2.
Switching: 5-Position Blade
Configuration: SSS
HARDWARE
Bridge: Deluxe 2-point synchronized Tremolo, Copper Infused High Mass 100% Metal Bridge Block (with Pop in Arm?)
Saddles: Block Saddles
Tuning Machines: Deluxe Staggered Cast/Sealed locking tuning machines
String Tree: Ezy Glider
Hardware: Nickel/Chrome
Pickguard: 1-Ply White, 8 Hole
Control Knobs: Chrome Hat
Switch Tip: Chrome
Tremolo Arm Tip: Unknown
Pickup covers: Navy Blue
Neck Plate: Asymmetric 4-Bolt, "Fender CORONA, CALIFORNIA"
COLORS
Snow White
MISCELLANEOUS:
Strings: .009-.042
ACCESSORIES
Hardshell Case
COMMENTS
The guitar was part of an extremely limited edition of instruments produced exclusively for Fender's top 200 United States dealers who decided to order some of them at Fender's Dealer Event in 2013.
It's so strange that according to the sticker on the pickguard pickups should be Noiseless and the guitar should be equipped with the S-1 switch, while actually pickups were not Noiseless, and the guitar was devoid of S-1 Switch.
Few units have the word “PROTOTYPE” stamped in the wood on the back of the headstock.
Courtesy of Reverb (Fuller's Guitar)
