MODEL NUMBER
0187000009
BODY
Body Material: Premium Alder
Body Finish: Gloss Urethane
Body Shape: Stratocaster
NECK
Neck Material: Maple
Neck Finish: Satin Urethane
Neck Shape: Modern “C”
Scale Length: 25.5" (648 mm)
Fingerboard Material: Maple; Rolled Fretboard Edges
Fingerboard Radius: 9.5” - 14” Compound Radius (241 mm - 355.6 mm)
Number of Frets: 22
Fret Size: Medium Jumbo
Nut Material: Synthetic Bone
Nut Width: 1.685” (42.8 mm)
Position Inlays: Black Pearloid Dot; Narrow Spacing
Truss Rod: BiFlex
Truss Rod Nut: 1/8" American Series
Skunk Stripe: Yes
Micro Tilt
HEADSTOCK
Type: Small, Matching Color
Logo: Appliqué
Other Decals, front: Silverish "STRATOCASTER"
Other Decals, back: "MADE IN USA", Serial Number
ELECTRONICS
Bridge Pickup: Vintage '56 Single-Coil Strat Pickups, Staggered Poles
Middle Pickup: Vintage '56 Single-Coil Strat Pickups, Staggered Poles
Neck Pickup: Vintage '56 Single-Coil Strat Pickups, Staggered Poles
Controls: Master Volume, Tone 1., Tone 2.
Switching: 5-Position Blade
Configuration: SSS
POSITIONS
HARDWARE
Bridge: Deluxe 2-point synchronized Tremolo with Pop in Arm and Copper Infused High Mass 100% Metal Bridge Block
Saddles: Stainless Steel Block Saddles
Tuning Machines: Deluxe Staggered Cast/Sealed Locking
String Tree: Ezy Glider
Hardware: Nickel/Chrome
Pickguard: 1-Ply White, 8 Hole
Control Knobs: Chrome
Switch Tip: Chrome
Tremolo Arm Tip: None
Pickup covers: White
Neck Plate: Asymmetric 4-Bolt, "Fender CORONA, CALIFORNIA"
COLORS
Snow White
MISCELLANEOUS:
Strings: .009-.042
Truss Rod/Tilt Adjustment Wrench: 1/8” Hex
Saddle Height Adjustment Wrench: .050” Hex
Tremolo Arm Sleeve Tension Adjustment Wrench: 3/32”
ACCESSORIES
SKB Hardshell Case (Black on Black)
COMMENTS
The guitar was part of an extremely limited edition of instruments produced exclusively for Fender's top 200 United States dealers who decided to order some of them at Fender's Dealer Event in 2013.
It's so strange that according to the sticker on the pickguard pickups should be Noiseless and the guitar should be equipped with the S-1 switch, while actually pickups were American Vintage '56 Strat single-coil pickups, specially wound to period-correct specs and tone, and the guitar was devoid of S-1 Switch.
Few units have the word “PROTOTYPE” stamped in the wood on the back of the headstock.
0187000009
BODY
Body Material: Premium Alder
Body Finish: Gloss Urethane
Body Shape: Stratocaster
NECK
Neck Material: Maple
Neck Finish: Satin Urethane
Neck Shape: Modern “C”
Scale Length: 25.5" (648 mm)
Fingerboard Material: Maple; Rolled Fretboard Edges
Fingerboard Radius: 9.5” - 14” Compound Radius (241 mm - 355.6 mm)
Number of Frets: 22
Fret Size: Medium Jumbo
Nut Material: Synthetic Bone
Nut Width: 1.685” (42.8 mm)
Position Inlays: Black Pearloid Dot; Narrow Spacing
Truss Rod: BiFlex
Truss Rod Nut: 1/8" American Series
Skunk Stripe: Yes
Micro Tilt
HEADSTOCK
Type: Small, Matching Color
Logo: Appliqué
Other Decals, front: Silverish "STRATOCASTER"
Other Decals, back: "MADE IN USA", Serial Number
ELECTRONICS
Bridge Pickup: Vintage '56 Single-Coil Strat Pickups, Staggered Poles
Middle Pickup: Vintage '56 Single-Coil Strat Pickups, Staggered Poles
Neck Pickup: Vintage '56 Single-Coil Strat Pickups, Staggered Poles
Controls: Master Volume, Tone 1., Tone 2.
Switching: 5-Position Blade
Configuration: SSS
POSITIONS
HARDWARE
Bridge: Deluxe 2-point synchronized Tremolo with Pop in Arm and Copper Infused High Mass 100% Metal Bridge Block
Saddles: Stainless Steel Block Saddles
Tuning Machines: Deluxe Staggered Cast/Sealed Locking
String Tree: Ezy Glider
Hardware: Nickel/Chrome
Pickguard: 1-Ply White, 8 Hole
Control Knobs: Chrome
Switch Tip: Chrome
Tremolo Arm Tip: None
Pickup covers: White
Neck Plate: Asymmetric 4-Bolt, "Fender CORONA, CALIFORNIA"
COLORS
Snow White
MISCELLANEOUS:
Strings: .009-.042
Truss Rod/Tilt Adjustment Wrench: 1/8” Hex
Saddle Height Adjustment Wrench: .050” Hex
Tremolo Arm Sleeve Tension Adjustment Wrench: 3/32”
ACCESSORIES
SKB Hardshell Case (Black on Black)
COMMENTS
The guitar was part of an extremely limited edition of instruments produced exclusively for Fender's top 200 United States dealers who decided to order some of them at Fender's Dealer Event in 2013.
It's so strange that according to the sticker on the pickguard pickups should be Noiseless and the guitar should be equipped with the S-1 switch, while actually pickups were American Vintage '56 Strat single-coil pickups, specially wound to period-correct specs and tone, and the guitar was devoid of S-1 Switch.
Few units have the word “PROTOTYPE” stamped in the wood on the back of the headstock.
Courtesy of Sweetwater