MODEL NUMBER
012-1500-(942)
BODY
Body Material: Selected Alder
Body Finish: Catalyzed Urethane
Body Shape: Stratocaster
NECK
Neck Material: Nicely Figured Birds Eye Maple
Neck Finish: Thin Layer Nitrocellulose
Neck Shape: C
Scale Length: 25.5" (648 mm)
Fingerboard Material: Maple
Fingerboard Radius: 9.5” (241mm)
Number of Frets: 22
Nut Material: Teflon
Nut Width: 1.650” (42mm)
Position Inlays: Black; Narrow Spacing
Skunk Stripe: Yes
HEADSTOCK
Type: Small headstock
Logo: Spaghetti Logo
Other Decals, front: "STRATOCASTER", "WITH SYNCHRONIZED TREMOLO", Signature
Other Decals, back: Custom Shop V Logo "F", Serial (101 to 164)
ELECTRONICS
Bridge Pickup: Seymour Duncan Vintage Staggered SSL1
Middle Pickup: Seymour Duncan Vintage Staggered SSL1
Neck Pickup: Di Marzio FS-1, Di Marzio Logo
Controls: Master Volume, Tone 1. (Neck), Tone 2. (Mid)
Switching: 5-Position Blade
Push-Pull on Tone 2. for Neck and Bridge Pick-up combo
Configuration: SSS
HARDWARE
Bridge: 2-Point American Standard Tremolo w/ Short Screw In Arm
Saddles: Powdered Stainless Steel Block Saddles
Tuning Machines: Fender Locking (Bright Finish)
String Tree: None
Hardware Finish: Gold
Pickguard: White, 1-Ply, 8 Holes
Control Knobs: White
Switch Tip: White
Tremolo Arm Tip: White
Neck Plate: 4-Bolt, V Custom Shop "F" Logo
COLORS
(942) Vintage Fiesta Red
MISCELLANEOUS
Strings: 009-042
Gold Vintage Fender Type Strap Buttons
ACCESSORIES
Vintage Tweed Case with Red Lining
Second pickguard signed by Han Marvin included
COMMENTS
Limited Edition, 64 made.
It is reported that when launched in 1992 the Signature was originally intended to be an edition of 100 instruments, but in 1995 the run was then extended with modifications to become the Autograph.
Commissioned and endorsed by Fender UK and sold only through their distributor Arbiter.
012-1500-(942)
BODY
Body Material: Selected Alder
Body Finish: Catalyzed Urethane
Body Shape: Stratocaster
NECK
Neck Material: Nicely Figured Birds Eye Maple
Neck Finish: Thin Layer Nitrocellulose
Neck Shape: C
Scale Length: 25.5" (648 mm)
Fingerboard Material: Maple
Fingerboard Radius: 9.5” (241mm)
Number of Frets: 22
Nut Material: Teflon
Nut Width: 1.650” (42mm)
Position Inlays: Black; Narrow Spacing
Skunk Stripe: Yes
HEADSTOCK
Type: Small headstock
Logo: Spaghetti Logo
Other Decals, front: "STRATOCASTER", "WITH SYNCHRONIZED TREMOLO", Signature
Other Decals, back: Custom Shop V Logo "F", Serial (101 to 164)
ELECTRONICS
Bridge Pickup: Seymour Duncan Vintage Staggered SSL1
Middle Pickup: Seymour Duncan Vintage Staggered SSL1
Neck Pickup: Di Marzio FS-1, Di Marzio Logo
Controls: Master Volume, Tone 1. (Neck), Tone 2. (Mid)
Switching: 5-Position Blade
Push-Pull on Tone 2. for Neck and Bridge Pick-up combo
Configuration: SSS
HARDWARE
Bridge: 2-Point American Standard Tremolo w/ Short Screw In Arm
Saddles: Powdered Stainless Steel Block Saddles
Tuning Machines: Fender Locking (Bright Finish)
String Tree: None
Hardware Finish: Gold
Pickguard: White, 1-Ply, 8 Holes
Control Knobs: White
Switch Tip: White
Tremolo Arm Tip: White
Neck Plate: 4-Bolt, V Custom Shop "F" Logo
COLORS
(942) Vintage Fiesta Red
MISCELLANEOUS
Strings: 009-042
Gold Vintage Fender Type Strap Buttons
ACCESSORIES
Vintage Tweed Case with Red Lining
Second pickguard signed by Han Marvin included
COMMENTS
Limited Edition, 64 made.
It is reported that when launched in 1992 the Signature was originally intended to be an edition of 100 instruments, but in 1995 the run was then extended with modifications to become the Autograph.
Commissioned and endorsed by Fender UK and sold only through their distributor Arbiter.
ENG: History of the Hank Marvin Fiesta Red Stratocaster and his signatures
ITA: Storia della Stratcaster Fiesta Red di Hank Marvin e le sue signature
ITA: Storia della Stratcaster Fiesta Red di Hank Marvin e le sue signature
Thanks to Larry Priestman for this beautiful all original Hank Marvin Stratocaster.
|
|
