MODEL NUMBER
026-5106-537
BODY
Body Material: Alder (or basswood?) with Koa Top
Body Finish: Polyurethane
Body Shape: Stratocaster
NECK
Neck Material: Birdseye Maple
Neck Finish: Satin Polyurethane
Neck Shape: Modern “C”
Scale Length: 25.5" (648 mm)
Fingerboard Material: Rosewood
Fingerboard Radius: 9.5” Radius (241mm)
Number of Frets: 22
Frets Size: Medium Jumbo
Nut Width: 1.625" (41.3 mm)
Position Inlays: Pearl Dots, Wide Spacing
Truss Rod: Headstock Access with Black Plastic Insert
Skunk Stripe: Yes
HEADSTOCK
Type: Small
Logo: Silver Embossed Spaghetti Logo
Other Decals, front: None
Other Decals, back: "MADE IN KOREA", Serial
ELECTRONICS
Bridge Pickup: Seymour Duncan Alnico Pro II Staggered APS-1N, with Staggered Pole Pieces and Logo
Middle Pickup: Seymour Duncan Alnico Pro II Staggered APS-1M, with Staggered Pole Pieces and Logo
Neck Pickup: Seymour Duncan Alnico Pro II Staggered APS-1B, with Staggered Pole Pieces and Logo
Middle Pickup RWRP: Yes
Controls: Master Volume, Tone 1. (Neck), Tone 2. (Mid, Bridge)
Switching: 5-Position Blade
Configuration: SSS
HARDWARE
Bridge: 2-Point Synchronized Tremolo
Saddles: Die-Cast Block Saddles
Tuning Machines: Ping Cast/Sealed Tuning Machines
String Tree: #2 Wing
Hardware: Chrome
Pickguard: 3-Ply Pearl, 11 Holes (config. modern)
Control Knobs: White
Switch Tip: White
Tremolo Arm Tip: White
Pickup covers: White
Neck Plate: 4-Bolt, "Fender"
COLORS
(537) Light Burst
MISCELLANEOUS
Strings: .009 to .042
Oversized Strap Buttons
ACCESSORIES
Less Case
FENDER SAYS
The Special Edition Koa Stratocaster guitar marks the first time the highly sought-after and exotic koa wood has been used outside the Custom Shop.
The Koa Strat features a koa veneer top on a basswood body, a birds-eye maple neck with a modern “C”-shape and a rosewood fingerboard, Seymour Duncan AlNiCo Pro II pickups, a two-point synchronized tremolo, and a pearl pickguard and dot inlays.
026-5106-537
BODY
Body Material: Alder (or basswood?) with Koa Top
Body Finish: Polyurethane
Body Shape: Stratocaster
NECK
Neck Material: Birdseye Maple
Neck Finish: Satin Polyurethane
Neck Shape: Modern “C”
Scale Length: 25.5" (648 mm)
Fingerboard Material: Rosewood
Fingerboard Radius: 9.5” Radius (241mm)
Number of Frets: 22
Frets Size: Medium Jumbo
Nut Width: 1.625" (41.3 mm)
Position Inlays: Pearl Dots, Wide Spacing
Truss Rod: Headstock Access with Black Plastic Insert
Skunk Stripe: Yes
HEADSTOCK
Type: Small
Logo: Silver Embossed Spaghetti Logo
Other Decals, front: None
Other Decals, back: "MADE IN KOREA", Serial
ELECTRONICS
Bridge Pickup: Seymour Duncan Alnico Pro II Staggered APS-1N, with Staggered Pole Pieces and Logo
Middle Pickup: Seymour Duncan Alnico Pro II Staggered APS-1M, with Staggered Pole Pieces and Logo
Neck Pickup: Seymour Duncan Alnico Pro II Staggered APS-1B, with Staggered Pole Pieces and Logo
Middle Pickup RWRP: Yes
Controls: Master Volume, Tone 1. (Neck), Tone 2. (Mid, Bridge)
Switching: 5-Position Blade
Configuration: SSS
HARDWARE
Bridge: 2-Point Synchronized Tremolo
Saddles: Die-Cast Block Saddles
Tuning Machines: Ping Cast/Sealed Tuning Machines
String Tree: #2 Wing
Hardware: Chrome
Pickguard: 3-Ply Pearl, 11 Holes (config. modern)
Control Knobs: White
Switch Tip: White
Tremolo Arm Tip: White
Pickup covers: White
Neck Plate: 4-Bolt, "Fender"
COLORS
(537) Light Burst
MISCELLANEOUS
Strings: .009 to .042
Oversized Strap Buttons
ACCESSORIES
Less Case
FENDER SAYS
The Special Edition Koa Stratocaster guitar marks the first time the highly sought-after and exotic koa wood has been used outside the Custom Shop.
The Koa Strat features a koa veneer top on a basswood body, a birds-eye maple neck with a modern “C”-shape and a rosewood fingerboard, Seymour Duncan AlNiCo Pro II pickups, a two-point synchronized tremolo, and a pearl pickguard and dot inlays.
Courtesy of Reverb, Essex Recording Studios
