MODEL NUMBER
033-1100-(Color #)
BODY
Body Material: Hardwood
Body Finish: Polyester
Body Shape: Stratocaster
NECK
Neck Material: Maple
Neck Finish: Polyester
Scale Length: 25.5” (648 mm)
Fingerboard Material: Maple Cap
Fingerboard Radius: 9.5” (241 mm)
Number of Frets: 21
Nut Material: Synthetic Bone
Nut Width: 1.625” (41 mm)
Position Inlays: Black Dots, Wide Spacing
Truss Rod: Head Adjust
Skunk Stripe: None
HEADSTOCK, Type 1
Type: Large
Logo: Oversized Silkscreen Black Bullet Logo
Other Decals, front: “by Squier”
Other Decals, back: None
HEADSTOCK, Type 1
Type: Large
Logo: Oversized Silkscreen Black Squier Logo
Other Decals, front: “by Fender”
Other Decals, back: None
ELECTRONICS
Pickup: 3 Single Coils with Single Ceramic Bar
Controls: Master Volume, Tone, Tone
Switching: 5-Position Blade
Configuration: SSS
HARDWARE
Bridge: Synchronous Tremolo with Thin Block
Saddles: Thin Die-Cast Block
Tuning Machines: Standard Die-Cast
String Tree: Wing
Hardware: Nickel/Chrome
Pickguard: 1-Ply White, 11-Hole
Back Plate: White
Control Knobs: White
Switch Tip: White
Tremolo Arm Tip: White
Pickup covers: White
Neck Plate: 4-Bolt, Plain
COLORS
(504) Daphne Blue
(506) Black
COMMENTS
No serial number as they were not for sale, but demo units only. They were made specifically for contests, giveaways, autograph sessions, and NAMM. About a hundred of these guitars were actually given to some amp manufacturers at NAMM in 2006 or 2007. The guitars were either to be returned to Fender for disposal after the conventions or to be destroyed by the exhibitors. Apparently, a few of the exhibitors kept them and sold them off outside of Fender's request.
033-1100-(Color #)
BODY
Body Material: Hardwood
Body Finish: Polyester
Body Shape: Stratocaster
NECK
Neck Material: Maple
Neck Finish: Polyester
Scale Length: 25.5” (648 mm)
Fingerboard Material: Maple Cap
Fingerboard Radius: 9.5” (241 mm)
Number of Frets: 21
Nut Material: Synthetic Bone
Nut Width: 1.625” (41 mm)
Position Inlays: Black Dots, Wide Spacing
Truss Rod: Head Adjust
Skunk Stripe: None
HEADSTOCK, Type 1
Type: Large
Logo: Oversized Silkscreen Black Bullet Logo
Other Decals, front: “by Squier”
Other Decals, back: None
HEADSTOCK, Type 1
Type: Large
Logo: Oversized Silkscreen Black Squier Logo
Other Decals, front: “by Fender”
Other Decals, back: None
ELECTRONICS
Pickup: 3 Single Coils with Single Ceramic Bar
Controls: Master Volume, Tone, Tone
Switching: 5-Position Blade
Configuration: SSS
HARDWARE
Bridge: Synchronous Tremolo with Thin Block
Saddles: Thin Die-Cast Block
Tuning Machines: Standard Die-Cast
String Tree: Wing
Hardware: Nickel/Chrome
Pickguard: 1-Ply White, 11-Hole
Back Plate: White
Control Knobs: White
Switch Tip: White
Tremolo Arm Tip: White
Pickup covers: White
Neck Plate: 4-Bolt, Plain
COLORS
(504) Daphne Blue
(506) Black
COMMENTS
No serial number as they were not for sale, but demo units only. They were made specifically for contests, giveaways, autograph sessions, and NAMM. About a hundred of these guitars were actually given to some amp manufacturers at NAMM in 2006 or 2007. The guitars were either to be returned to Fender for disposal after the conventions or to be destroyed by the exhibitors. Apparently, a few of the exhibitors kept them and sold them off outside of Fender's request.
ENG: History of the Squier made in China and Indonesia
ITA: Storia delle Squier Made in China e Indonesia
ITA: Storia delle Squier Made in China e Indonesia
Black version with "Bullet" logo, Courtesy of Reverb (Kickstand's)
Daphne Blue version with "Squier" Logo
