MODEL NUMBER
013-0112-(506)
BODY
Body Material: Alder
Body Finish: Polyester
Body Shape: Stratocaster
NECK
Neck Material: Maple
Neck Finish: Satin Polyurethane
Scale Length: 25.5" (648 mm)
Fingerboard Material: Rosewood
Fingerboard Radius: 9.5” (241 mm)
Number of Frets: 21
Fret Size: Vintage Style
Nut Material: Synthetic Bone
Nut Width: 1.650” (42 mm)
Position Inlays: White Dots, Narrow Spacing
Truss Rod: Standard (Headstock Adjust)
Skunk Stripe: Yes
HEADSTOCK
Type: Small, Matching Painted Headstock with Orange Flames
Logo: White '70 Style Logo
Other Decals, front: "STRATOCASTER", "MADE IN MEXICO", Serial Number
Other Decals, back: None
ELECTRONICS
Bridge Pickup: Standard Single Coil Pickup (Ceramic Magnets), symmetrically staggered
Middle Pickup: Standard Single Coil Pickup (Ceramic Magnets), symmetrically staggered
Neck Pickup: Standard Single Coil Pickup (Ceramic Magnets), symmetrically staggered
Controls: Master Volume, Tone 1. (Neck), Tone 2. (Mid)
Switching: 5-Position Blade
Configuration: SSS
HARDWARE
Bridge: Vintage Style Synchronized Tremolo
Saddles: Fender/Ping Vintage Style, "FENDER"/"FENDER", same direction
Tuning Machines: Fender/Ping Standard Cast/Sealed Tuning Machines
String Tree: Wing
Hardware: Chrome
Pickguard: 3-Ply Black, 11 Holes (Config. Modern)
Control Knobs: Black
Switch Tip: Black
Tremolo Arm Tip: Black
Pickup covers: Black
Neck Plate: 4-Bolt, Plain
COLORS
(506) Black with Orange Flames
MISCELLANEOUS:
Strings: .009 to .042
Truss Rod Wrench: 3/16” Hex
Saddle Height Adjustment Wrench: Hex 1.5mm
Bridge Mounting Spacing: 2 1/16" (52mm)
Bridge String Spacing: 2 1/16" (52mm)
ACCESSORIES
Less Case
COMMENTS
Special run of approximately 250 for Layne Kurr’s Canadian Dealers, Layne may have had some run with Texas Special pickups.
013-0112-(506)
BODY
Body Material: Alder
Body Finish: Polyester
Body Shape: Stratocaster
NECK
Neck Material: Maple
Neck Finish: Satin Polyurethane
Scale Length: 25.5" (648 mm)
Fingerboard Material: Rosewood
Fingerboard Radius: 9.5” (241 mm)
Number of Frets: 21
Fret Size: Vintage Style
Nut Material: Synthetic Bone
Nut Width: 1.650” (42 mm)
Position Inlays: White Dots, Narrow Spacing
Truss Rod: Standard (Headstock Adjust)
Skunk Stripe: Yes
HEADSTOCK
Type: Small, Matching Painted Headstock with Orange Flames
Logo: White '70 Style Logo
Other Decals, front: "STRATOCASTER", "MADE IN MEXICO", Serial Number
Other Decals, back: None
ELECTRONICS
Bridge Pickup: Standard Single Coil Pickup (Ceramic Magnets), symmetrically staggered
Middle Pickup: Standard Single Coil Pickup (Ceramic Magnets), symmetrically staggered
Neck Pickup: Standard Single Coil Pickup (Ceramic Magnets), symmetrically staggered
Controls: Master Volume, Tone 1. (Neck), Tone 2. (Mid)
Switching: 5-Position Blade
Configuration: SSS
HARDWARE
Bridge: Vintage Style Synchronized Tremolo
Saddles: Fender/Ping Vintage Style, "FENDER"/"FENDER", same direction
Tuning Machines: Fender/Ping Standard Cast/Sealed Tuning Machines
String Tree: Wing
Hardware: Chrome
Pickguard: 3-Ply Black, 11 Holes (Config. Modern)
Control Knobs: Black
Switch Tip: Black
Tremolo Arm Tip: Black
Pickup covers: Black
Neck Plate: 4-Bolt, Plain
COLORS
(506) Black with Orange Flames
MISCELLANEOUS:
Strings: .009 to .042
Truss Rod Wrench: 3/16” Hex
Saddle Height Adjustment Wrench: Hex 1.5mm
Bridge Mounting Spacing: 2 1/16" (52mm)
Bridge String Spacing: 2 1/16" (52mm)
ACCESSORIES
Less Case
COMMENTS
Special run of approximately 250 for Layne Kurr’s Canadian Dealers, Layne may have had some run with Texas Special pickups.
Courtesy of Reverb (Guitars and Effects)
Courtesy of Shelton's Guitars
Courtesy of Reverb (Nickles Buy Sell Trade)
