MODEL NUMBER
027-9302-(000)
BODY
Body Material: Basswood
Body Finish: Polyester
Body Shape: Stratocaster
NECK
Neck Material: Maple
Neck Finish: Polyester
Neck Shape: “U”
Scale Length: 25.5" (648 mm)
Fingerboard Material: Maple
Fingerboard Radius: 7.25” (184 mm)
Number of Frets: 21
Fret Size: Vintage Style
Nut Width: 1.650” (42 mm)
Position Inlays: Black Dots, Narrow Spacing
Truss Rod: Bullet
Skunk Stripe: Yes
Micro Tilt
Neck Heel Decal: "MADE IN JAPAN", Serial
HEADSTOCK
Type: Large
Logo: Black CBS Logo
Other Decals, front: "STRATOCASTER", "ORIGINAL Contour Body"
Other Decals, back: None
ELECTRONICS
Pickups: Reissue Strat Pickup (early models); then Standard Strat Single Coil
Middle Pickup: Reissue Strat Pickup (early models); then Standard Strat Single Coil
Neck Pickup: Reissue Strat Pickup (early models); then Standard Strat Single Coil
Controls: Master Volume, Tone 1. (Neck), Tone 2. (Mid)
Switching: 5-Position Blade
Configuration: SSS
HARDWARE
Bridge: Die-Cast Tremolo
Saddles: Die-Cast Block Saddles, unstamped
Tuning Machines: Standard Cast/Sealed Gotoh Tuners, unslotted
String Tree: #2, Wing
Hardware: Chrome
Pickguard: Blue Flower, 11 Holes (config. modern)
Control Knobs: White
Switch Tip: White
Tremolo Arm Tip: White
Pickup covers: White
Neck Plate: 3-Bolt, "F", "FENDER JAPAN"
COLORS
Blue Flower
ACCESSORIES
Less Case
COMMENTS
Blue Flower pattern slightly different from Blue Flower Stratocaster (Model #2)
Not to be confused it with the domestic Blue Flower Stratocaster
The finishes are actually done by putting foil paper with the design on it on the guitar and gluing it to the wood. The paper is cut off at the edges of the guitar and then done again on the back of the guitar the same way. The blue is used to cover the places where the foil paper ends and creates the cool burst color.
027-9302-(000)
BODY
Body Material: Basswood
Body Finish: Polyester
Body Shape: Stratocaster
NECK
Neck Material: Maple
Neck Finish: Polyester
Neck Shape: “U”
Scale Length: 25.5" (648 mm)
Fingerboard Material: Maple
Fingerboard Radius: 7.25” (184 mm)
Number of Frets: 21
Fret Size: Vintage Style
Nut Width: 1.650” (42 mm)
Position Inlays: Black Dots, Narrow Spacing
Truss Rod: Bullet
Skunk Stripe: Yes
Micro Tilt
Neck Heel Decal: "MADE IN JAPAN", Serial
HEADSTOCK
Type: Large
Logo: Black CBS Logo
Other Decals, front: "STRATOCASTER", "ORIGINAL Contour Body"
Other Decals, back: None
ELECTRONICS
Pickups: Reissue Strat Pickup (early models); then Standard Strat Single Coil
Middle Pickup: Reissue Strat Pickup (early models); then Standard Strat Single Coil
Neck Pickup: Reissue Strat Pickup (early models); then Standard Strat Single Coil
Controls: Master Volume, Tone 1. (Neck), Tone 2. (Mid)
Switching: 5-Position Blade
Configuration: SSS
HARDWARE
Bridge: Die-Cast Tremolo
Saddles: Die-Cast Block Saddles, unstamped
Tuning Machines: Standard Cast/Sealed Gotoh Tuners, unslotted
String Tree: #2, Wing
Hardware: Chrome
Pickguard: Blue Flower, 11 Holes (config. modern)
Control Knobs: White
Switch Tip: White
Tremolo Arm Tip: White
Pickup covers: White
Neck Plate: 3-Bolt, "F", "FENDER JAPAN"
COLORS
Blue Flower
ACCESSORIES
Less Case
COMMENTS
Blue Flower pattern slightly different from Blue Flower Stratocaster (Model #2)
Not to be confused it with the domestic Blue Flower Stratocaster
The finishes are actually done by putting foil paper with the design on it on the guitar and gluing it to the wood. The paper is cut off at the edges of the guitar and then done again on the back of the guitar the same way. The blue is used to cover the places where the foil paper ends and creates the cool burst color.
ENG: The origin of Fender Japan and more information about Paisley and Blue Flower Strats
ITA: La nascita del Made in Japan Fender e maggiori dettagli sulle finiture Paisley e Blue Flower
ITA: La nascita del Made in Japan Fender e maggiori dettagli sulle finiture Paisley e Blue Flower
Courtesy of Chicago Music Exchange
